Difference between revisions of "Electronics"
Jump to navigation
Jump to search
(Created page with "Electronics Stub") |
|||
| Line 1: | Line 1: | ||
Electronics Stub | Electronics Stub | ||
| + | |||
| + | There are three workbenches in Electronics, each will be set up for a speciality: | ||
| + | |||
| + | Station 1 (blue): SMD and rework. This will have the microscope and reflow oven, and eventually a higher-quality hot-air rework station, a tub of solder paste, a variety of tweezers, and other SMD tools. | ||
| + | |||
| + | Station 2 (red): high-speed signals and testing: This will have our large, high-speed scope, function generator, a logic analyzer, and possibly a testbed with adjustable arms tipped with pogo pins. | ||
| + | |||
| + | Station 3 (green): battery spot welder, possibly other battery-related or power-related equipment. It will have a DC supply and multimeter. | ||
Revision as of 23:35, 28 November 2023
Electronics Stub
There are three workbenches in Electronics, each will be set up for a speciality:
Station 1 (blue): SMD and rework. This will have the microscope and reflow oven, and eventually a higher-quality hot-air rework station, a tub of solder paste, a variety of tweezers, and other SMD tools.
Station 2 (red): high-speed signals and testing: This will have our large, high-speed scope, function generator, a logic analyzer, and possibly a testbed with adjustable arms tipped with pogo pins.
Station 3 (green): battery spot welder, possibly other battery-related or power-related equipment. It will have a DC supply and multimeter.