55
edits
Changes
Jump to navigation
Jump to search
Line 165:
Line 165: + − + − |- − | Cut || 4.5mm Acrylic || 6 || 100 − + Line 183:
Line 182: − + + +
Laser Cutter (G Weike) (view source)
Revision as of 17:34, 14 December 2020
, 17:34, 14 December 2020→Material Power Speed Guidelines
===Material Power Speed Guidelines===
===Material Power Speed Guidelines===
'''NOTE''' These are starting points. Adjustments will be necessary based on variations in material, alignment of mirrors, age of the laser tube, and other factors.
'''NOTE''' These are starting points. Adjustments will be necessary based on variations in material, alignment of mirrors, age of the laser tube, and other factors.
'''NEEDS UPDATING'''
{| class="wikitable"
{| class="wikitable"
|-
|-
! Type !! Material !! Speed !! Power
! Type !! Material !! Speed !! Power
|-
|-
| Cut || MDF || 18 || 100
| Cut || 3mm MDF || 18 || 100
|-
|-
| Cut || 1/4" MDF || 4 || 100
| Cut || 1/4" MDF || 4 || 100
|-
|-
| Engrave || MDF || xx || xx
| Engrave || MDF || xx || xx
|-
|-
| Cut || Baltic Birch Plywood || 18 || 100
| Cut || 3mm Baltic Birch Plywood || 18 || 100
|-
|-
| Cut || 1/8" Baltic Birch Plywood || 12 || 100
| Cut || 1/8" Baltic Birch Plywood || 12 || 100
| Engrave || Baltic Birch Plywood || xx || xx
| Engrave || Baltic Birch Plywood || xx || xx
|-
|-
| Cut || Acrylic || 18 || 100
| Cut || 3mm Acrylic || 18 || 100
|-
| Cut || 4.5mm Acrylic || 6 || 100
|-
|-
| Engrave || Acrylic || xx || xx
| Engrave || Acrylic || xx || xx