55
edits
Changes
Jump to navigation
Jump to search
Line 24:
Line 24: − ##Laser Cut must be started after the laser has been powered on (green light). Otherwise you may receive an error.+ Line 36:
Line 36: − +
→Loading Your File
===Loading Your File===
===Loading Your File===
#Open Laser Cut 5.3
#Open Laser Cut 5.3
**Laser Cut must be started after the laser has been powered on (green light). Otherwise you may receive an error.
#Select your file/design for your project
#Select your file/design for your project
##Laser Cut project files are saved as .ECP files and can be opened using FILE -> OPEN
##Laser Cut project files are saved as .ECP files and can be opened using FILE -> OPEN
##Be sure to scroll the layer window to the right to ensure the layer is enabled.
##Be sure to scroll the layer window to the right to ensure the layer is enabled.
##When engraving, double click the layer to ensure the scan gap is set to your preferences
##When engraving, double click the layer to ensure the scan gap is set to your preferences
#Set the origin relative to the material (preferably the top right corner). The blue dot indicates where the laser will start cutting. Make sure that the “immediate” button is checked.
#Set the origin relative to the material (preferably the top right corner). The blue dot indicates where the laser will start cutting. Make sure that the “immediate” button is checked.
===Starting the Laser Cutter===
===Starting the Laser Cutter===