27
edits
Changes
Jump to navigation
Jump to search
no edit summary
Line 21:
Line 21:
+
== Printer ==
== Printer ==
−Kwartzlab has 3 Bambu Lab P1S 3D printers available. Each printer has a 256mm x 256mm x 256mm printable area and supports up to 4 color filament printing with the attached AMS.
+Kwartzlab has 3 Bambu Lab P1S 3D printers available, with the following key features:
−* 256mm x 256mm x 256mm enclosed printing area
+* 0.4mm nozzle allowing layer heights from 0.08mm (Fine) to 0.28 (Draft)
+* Supports up to 4 color filament printing with the attached AMS
+* Detects filament runout and allows resumption of prints
+* Supports PLA, PETG and TPU (See [[Allowed Filaments]])
+** '''Note:''' [[TPU]] printing is only allowed on Po (Bambu #1), and filament must be manually loaded (No AMS!)
+== Automatic Material System (AMS) ==
== Automatic Material System (AMS) ==
Each of our Bambu Lab P1S printers has an Automatic Material System (AMS) attached to it. This accessory allows up to 4 different filament spools to be loaded at the same time for multi-colour or multi-material printing.
Each of our Bambu Lab P1S printers has an Automatic Material System (AMS) attached to it. This accessory allows up to 4 different filament spools to be loaded at the same time for multi-colour or multi-material printing.
+
+See [[Multi-color Printing]] for more information and helpful tips.
== Allowed Filaments ==
== Allowed Filaments ==
Line 32:
Line 40:
== Slicer Software ==
== Slicer Software ==
−:Bambu Studio
+:[[Bambu Studio]]
== Modeling Software ==
== Modeling Software ==