Difference between revisions of "3D Printers (Bambu Lab P1S)"
Jump to navigation
Jump to search
(stub) |
|||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{ToolInfo | ||
| + | |picture=BambuP1S.png | ||
| + | |makemodel=Bambu Lab P1S | ||
| + | |serial= | ||
| + | |Area=Electronics | ||
| + | |Team=3D Printer Team | ||
| + | |PPE=None | ||
| + | |guests=No | ||
| + | |trainingReq=Required | ||
| + | |trainingLink=N/A | ||
| + | |status=Working | ||
| + | |manual= | ||
| + | }} | ||
| + | |||
| + | == Summary == | ||
| + | |||
| + | |||
== Training Info == | == Training Info == | ||
| − | Post to the {{slack| | + | Post to the {{slack|area-3d-printing}} channel on Slack, and tag '''@3dprinterteam''' to request training. |
| + | |||
| + | == Printer == | ||
| + | |||
| + | Kwartzlab has 3 Bambu Lab P1S 3D printers available, with the following key features: | ||
| + | * 256mm x 256mm x 256mm enclosed printing area | ||
| + | * 0.4mm nozzle allowing layer heights from 0.08mm (Fine) to 0.28 (Draft) | ||
| + | * Supports up to 4 color filament printing with the attached AMS | ||
| + | * Detects filament runout and allows resumption of prints | ||
| + | * Supports PLA, PETG and TPU (See [[Allowed Filaments]]) | ||
| + | ** '''Note:''' [[TPU]] printing is only allowed on Po (Bambu #1), and filament must be manually loaded (No AMS!) | ||
| + | |||
| + | == Automatic Material System (AMS) == | ||
| + | |||
| + | Each of our Bambu Lab P1S printers has an Automatic Material System (AMS) attached to it. This accessory allows up to 4 different filament spools to be loaded at the same time for multi-colour or multi-material printing. | ||
| + | |||
| + | See [[Multi-color Printing]] for more information and helpful tips. | ||
| + | |||
| + | == Allowed Filaments == | ||
| + | The following page contains the most up to date listing of the filament materials and brands that we allow to be used with our printers. | ||
| + | :[[Allowed Filaments]] | ||
| + | |||
| + | == Slicer Software == | ||
| + | :[[Bambu Studio]] | ||
| + | |||
| + | == Modeling Software == | ||
| + | This section will likely become its own page in the future. | ||
| + | :FreeCAD - Free - Open Source CAD Software, supports Windows, Mac, Linux - [https://www.freecad.org/ FreeCAD Website] | ||
| + | :Blender - Free - Not a CAD package, but can be used for more organic modeling (creatures, etc) - [https://blender.org Blender Website] | ||
| + | :TinkerCAD - Free (requires login) - Easy to learn modeling software - [https://www.tinkercad.com/ TinkerCAD] | ||
| + | :Onshape - Free (conditions) / Subscription - Commercial Web-based CAD software with a free option. All models created with free accounts are free/searchable. - [https://www.onshape.com/en/products/free onshape.com] | ||
| + | :Fusion 360 - Free (conditions) / Subscription - Commercial CAD Software (Windows/Mac) with a hobbyist plan. Up to 10 editable models at a time. - [https://www.autodesk.com/ca-en/products/fusion-360/personal Autodesk Fusion 360] | ||
| + | :Solidworks - Commerical / Subscription - Commercial CAD Software [https://www.solidworks.com/product/solidworks-3d-cad SolidWorks 3D CAD] | ||
[[Category:Tools]] [[Category:RequiresTraining]] | [[Category:Tools]] [[Category:RequiresTraining]] | ||
Latest revision as of 00:15, 5 March 2025
| 3D Printers (Bambu Lab P1S) | |
|---|---|
| |
| Make and Model | Bambu Lab P1S |
| Serial Number | |
| Area | Electronics |
| Maintained by Team | 3D Printer Team |
| Required PPE | None |
| Can Guests Use? | No |
| Training Required? | Required |
| Link to Training | N/A |
| Tool Status | Working |
| Manual | |
Summary
Training Info
Post to the #area-3d-printing channel on Slack, and tag @3dprinterteam to request training.
Printer
Kwartzlab has 3 Bambu Lab P1S 3D printers available, with the following key features:
- 256mm x 256mm x 256mm enclosed printing area
- 0.4mm nozzle allowing layer heights from 0.08mm (Fine) to 0.28 (Draft)
- Supports up to 4 color filament printing with the attached AMS
- Detects filament runout and allows resumption of prints
- Supports PLA, PETG and TPU (See Allowed Filaments)
- Note: TPU printing is only allowed on Po (Bambu #1), and filament must be manually loaded (No AMS!)
Automatic Material System (AMS)
Each of our Bambu Lab P1S printers has an Automatic Material System (AMS) attached to it. This accessory allows up to 4 different filament spools to be loaded at the same time for multi-colour or multi-material printing.
See Multi-color Printing for more information and helpful tips.
Allowed Filaments
The following page contains the most up to date listing of the filament materials and brands that we allow to be used with our printers.
Slicer Software
Modeling Software
This section will likely become its own page in the future.
- FreeCAD - Free - Open Source CAD Software, supports Windows, Mac, Linux - FreeCAD Website
- Blender - Free - Not a CAD package, but can be used for more organic modeling (creatures, etc) - Blender Website
- TinkerCAD - Free (requires login) - Easy to learn modeling software - TinkerCAD
- Onshape - Free (conditions) / Subscription - Commercial Web-based CAD software with a free option. All models created with free accounts are free/searchable. - onshape.com
- Fusion 360 - Free (conditions) / Subscription - Commercial CAD Software (Windows/Mac) with a hobbyist plan. Up to 10 editable models at a time. - Autodesk Fusion 360
- Solidworks - Commerical / Subscription - Commercial CAD Software SolidWorks 3D CAD