Combo Belt & Disc Sander
| Combo Belt & Disc Sander | |
|---|---|
| [[File:|300px]] | |
| Make and Model | unknown |
| Serial Number | |
| Area | Woodshop (Area) |
| Maintained by Team | Woodshop Team |
| Required PPE | Eye Required, Hearing recommended |
| Can Guests Use? | No |
| Training Required? | Yes |
| Link to Training | Google Classroom qv673g2 |
| Tool Status | Working |
Safety Info
In addition to the Woodshop Rules,
- Keep your fingers at least one inch from the sanding surface
- Keep the workpiece in contact with the rest
- When using the disc, always work on the side where the sandpaper is traveling down
Training Info
Before training on any particular tool in the woodshop, you must complete the general woodshop training which covers safety and rules that are universal for all woodshop equipment).
After that, you may complete the online portion of training via google classroom (See quick info), then you should be contacted to arrange in-person training. Otherwise, an in person portion can be coordinated by posting to the #area-wood-shop slack channel
Consumables
The lab will replace the disc if/when it gets too worn, and should not be swapped by members. The lab also provides a 120 grit belt, but members may supply their own belts as well. The supplied 120 grit belt should always be put back on when you're finished. The belts are 6"x48"