Difference between revisions of "Replacement Parts"
| Line 16: | Line 16: | ||
== Metal Shop Equipment == | == Metal Shop Equipment == | ||
| − | + | '''<div id=paintboothparts>[[Paint Booth]]</div>''' | |
| + | The paint booth uses QTY 6 furnace filters that are 16x25x1". | ||
| + | |||
| + | == Laser == | ||
| + | |||
| + | '''<div id=gweikelasercutterparts>[[G Weike Laser Cutter]]</div>''' | ||
| + | The large laser cutter previously used QTY 1 16x25x4" and QTY 2 16x25x1" furnace filters per filter box. Currently only the 4" filter is being used, with further filtering changes possible. | ||
Revision as of 01:49, 6 July 2022
This page lists replacement parts for various tools and equipment at Kwartzlab.
Woodshop Equipment
The medium bandsaw uses 93 1/2" by 1/4" width 6 TPI blades.
The large bandsaw uses 133 1/2" blades.
Belts are "551 Gates Truflex 1280RT", part number CGC 81.083.804/0002-71. Measureed width is 3/8", height is 1/4". Current Truflex catalogue states the 3L size belts should be 3/8" wide by 7/32" (.218") tall. Measured outer circumference is 27 7/8". Searching the part numbers has not yielded results I'd trust, probably best to go through a distributor that can cross-reference all required info.
Gates belt catalogue saved on Google Drive
Metal Shop Equipment
The paint booth uses QTY 6 furnace filters that are 16x25x1".
Laser
The large laser cutter previously used QTY 1 16x25x4" and QTY 2 16x25x1" furnace filters per filter box. Currently only the 4" filter is being used, with further filtering changes possible.